|
 |
 | |
|
|
|
| |
|
|
| |
| ||
|
|
| |
|
|
| |
|
|
Home > Services > Electrical > Special Lighting Systems > Special lighting systems Dynalite The Dynalite lighting control system provides a total management package for all lighting needs – control, monitoring, maintenance, reporting and economy.Suitable for both residential and commercial applications, a variety of control methods provide the end user with complete flexibility, reliability and simplicity including touch button control panels, LCD touch screens with custom graphics and icon control on individual PCs.
View Potential Green Star credits
Hotel Ballrooms Hotel Suites Art Galleries and Museums Boardrooms and Lecture Theatres Corporate Office Warehouses Retail and Hospitality Residential Homes
Energy management Reduced maintenance costs Extended lamp life Personalized lighting for greater comfort and productivity Seamless integration with Building Management Systems and Access Control Systems Unlimited lighting configurations, flexibility and control without expensive rewiring. The Dynalite system meets the RoHS directive in Europe
Touch button control panel for pre set lighting scenes Timeclocks - to ensure lights are only operated when required Motion Detectors – maintain standby levels of lighting in low traffic areas and automatically adjust when movement is sensed. PE sensors - to “harvest” available natural light and alter supplementary light levels to maximize power savings. LCD Touchscreen – operates in a similar way to the conventional control panel or key pad. In response to to end user commands, the unit will broadcast messages across the network. PC or Laptop – is used to set up and configure a Dynet network using the DLight application software
The Dynalite system utilizes a distributed processing architecture, where a range of devices are interconnected over an RS485 network to form a complete control solution. Command and status information passes to all devices over this network using the event based DyNet protocol. Dynalite control devices incorporate an integral microprocessor and non-volatile memory. All configuration data required by each device to operate is stored within the non-volatile memory of the device. DLight, Dynalite’s commissioning, monitoring and control software, is used to modify configuration registers within each device.
Devices on the Dynalite network are designed for indoor use only. If installing in an external location, the dimmer must be housed in a suitable well-ventilated enclosure. Choose a dry location that will be accessible after the installation is complete. To ensure the cooling system functions correctly, the dimmer should only be mounted vertically, the right way up. The dimmer will generate heat when operating approximately 2 Watts per Amp of load, and requires an air gap of 200mm on each side and at the top and bottom of the device. This air gap is also required to ensure serviceability of the dimmer without complete removal from the mounting surface.
|
| |||||||||||||||||||||||||||||||||||||||||||||||||
