Greenbuild | Building Product Details

Home > Finish > Painting and paperhanging > Interior Painting > Interior painting - plasterboard and fibrous plaster

Taubmans UltraProof Range

Taubmans UltraProof Acrylic Enamel is an advanced formulation acrylic with enamel-like characteristics for interior and exterior use. It combines the smooth finishing properties and serviceability of enamels with the low odour, quick dry, and convenience of water based. The UltraProof range includes:
- UltraProof Acrylic Enamel Gloss
- UltraProof Acrylic Enamel Satin
- UltraProof Acrylic Enamel Semi-gloss
- UltraProof Acrylic Enamel Eggshell

One product in the UltraProof range is able to meet the low VOC requirements of Green Star NZ. This is:
UltraProof Acrylic Enamel Gloss

Certifications/Credits

View Product Certifications
View Potential Green Star credits

Application/Purpose

Taubmans UltraProof is intended for
Doors
Windows, trim
Timber joinery of all types
Broadwalls in wet areas e.g. bathrooms, laundries and kitchens

Benefits/Advantages

Non yellowing
Ideal for broadwalls in wet areas
Resists sticking on contact areas
Rapid dry
Good exterior gloss retention

Composition

Vehicle Type: Acrylic enamel
Pigmentation: Titanium Dioxide
Solvent: Water

Technical Properties

Pot Life: Not applicable
Finish: Satin (gloss at 60° 30-35 %)
Colour: A comprehensive colour range is available
Touch Dry Time: 30 minutes at 20°C & 65% RH (minimum)
Recoat: 4 hours at 20°C & 65% RH (minimum)
Preparatory Coat: Required
Theoretical Coverage: 14-16 sq.metres per litre
Dry Film Thickness: 23-26µ
Usual no. of Coats: 2
Toxicity of dry film: Non toxic
Durability: Excellent
Thinning and Clean up: Clean water
V.O.C: 74 grams per litre
Fire ratings: SFI 0, SDI, 1-3 (substrate Std GIB) Compliant with NZBC C3/AS1: table 4 sections, 1,2,3,4,5,6,7,8,9,10 (refer Wattyl Taubmans Fire ratings document for full details)

Installation and Maintenance Summary

After surface preparation and the quality of the paint itself, the next most important factor that contributes significantly to the life of the coating system is proper application. Coatings today are becoming more and more specialised in their use and in general require specific application methods which should be followed if the best results are to be achieved. Refer to our Guide to Coatings Application

Certificates / Compliances and Relevant Standards
	Green Star NZ

Green Star NZ Credit Approval
Please note the information below provides an indication of 'potential points' under Green Star Office Design V.1. Green Star NZ points are weighted by the environmental significance of the category they are in. Each point contributes to the total overall score of the project but are not absolute. For further understanding of the Green Star rating tools, Greenbuild strongly recommends that users attend an 'Introduction to Green Star' seminar. More information is available at the New Zealand Green Building Council website.
Greenbuild has reviewed this product and confirms its potential contribution to points under the following credit categories:
IEQ-13	Up to three points are awarded where it is demonstrated that various finishes meet the benchmarks for low Volatile Organic Compound (VOC) content. One point is awarded for each criterion below that is achieved: • 95% of all painted surfaces are low-VOC paints OR no paint is used; • All carpets are low-VOC OR no carpet is installed; and/or • All adhesives and sealants are low-VOC OR no adhesives/sealants are used.