Greenbuild | Building Product Details

Home > Interior > Linings > Trim and Protection > Trim to walls, partitions and openings

ECO.EDGE Mouldings And Jambs

Scotia – The finishing touch to ceilings and walls
Architraves – The finishing touch to the doors and windows
Skirting – The finishing touch to the wall and floor
Door jambs – For all your door jamb requirements

Either available primed or unprimed.

Please note: to ensure you receive timber that has gone through the valid chain of custody, please request to see this information on the invoices.

Certifications/Credits

View Product Certifications

Application/Purpose

ECO.EDGE mouldings and jambs are designed for interior use only. They should not be used in situations where they will be exposed to water, prolonged humidity or high temperatures, e.g. showers or saunas.

Benefits/Advantages

All of our standard products are available with Low Formaldehyde emissions EO.
E0- Formaldehyde emission from a product that is less than 0.5mg/L using the desiccators testing method

Composition

Moisture Resistant MDF panel is remanufactured into architraves, shirtings and jambs.
Once machined to shape most profiles are then sanded and vacuum coated with a water based acrylic paint.

Technical Properties

Softwoods ( pine Species )
CAS Number – None - Proportion ›or = 78% ( 70% mixed sources FSC content)

Polymerised Urea Formaldehyde resin:
CAS Number 9011.05.6 - Proportion ›or = 20%

Paraffin wax
CAS Number 8002.74.2 - Proportion ›or = 2%

Free formaldehyde by weight
CAS Number 50.00.0 - Proportion ›0.01%

Installation and Maintenance Summary

Storage and conditioning - ECO.EDGE mouldings and jambs should be stored away from moisture, heat and direct sunlight in a well ventilated area. Prior to fixing it is recommended that the mouldings are removed from all packaging, separated and preconditioned

Cutting – A fine toothed saw is recommended for cutting mouldings, with the blade cutting on the downward stroke.

Fixing – Corrosion resistant fastening options included the following.

Nailing - use standard finishing brad lengths, giving a minimum fixing penetration of 25mm into the framing timber.

Stapling- Narrow crown staples are recommended. Excessive penetration below the surface should be avoided, regulative air pressure accordingly. Staple length should be twice the thickness of the moulding to allow sufficient hold into the framing timber.

Adhesives - ECO.EDGE mouldings and jambs can be back fixed using contact or wall board adhesive in the area of installation for a minimum of 48 hours.

Certificates / Compliances and Relevant Standards
	ISO 14001 (Environmental Management)	Environmental Choice New Zealand
	FSC

Greenbuild Environmental Assessment
SUSTAINS NATURAL HABITAT The timber used in Eco Edge has a minimum of 50% content sourced from FSC chain of custody.
MINIMISES GREENHOUSE GASES / ENERGY USE Southern Pine Products has systems in place to record and track the power usage, LPG and Diesel used at each month. Continuous actions aim to progressively reduce the energy use (i.e. installing energy efficient lighting and motors). SPP is also looking at reducing potential energy use and considering environmental issues for any new purchases.
LOW HEALTH RISK Eco Edge contains no hazardous substances prohibited by Environmental Choice NZ Standards. No fungicides or biocides are added to the wood products. Surface treatments used by Southern Pine Products do not include any substance that contains formaldehyde and are classified as non-toxic or allergenic by inhalation. SPP also undertake noise monitoring and workplace formaldehyde monitoring annually.
LIMITS POLLUTION SPP has a formal environmental management system (EMS) with ISO 14001 in place. This compliments the company gaining regulatory consent for air discharge, hazardous substance certification under government HSNO regulations and waste management.
RESOURCE EFFICIENT The manufacturing site for the product has installed a briquetting and palletizing machine for processing waste wood. The pallets will be returned to the supplier of the MDF board, Dongwha Patinna to use in their wood waste burner used to provide energy for their plant. Any surpluss goes to other industrial burners.