|
 |
 | |
|
|
|
| |
|
|
| |
| ||
|
|
| |
|
|
| |
|
|
Home > Interior > Joinery fixtures and hardware > Fixtures > Preformed and prefinished room units Bestwood Reconstituted Veneer Bestwood Reconstituted Veneer is a unique contemporary product. Bestwood Reconstituted Veneer offers considerable creative possibilities. The intricate consistent grain, rich consistent colourings and warmth of wood veneer are a constant source of inspiration and design flexibility.You can trust the reliability, accuracy and consistency of Bestwood Reconstituted Veneers.
Bestwood Reconstituted Wood Veneer can be produced as; Panels Solid edging solution – Bestwood Avantedge Bestwood Reconstituted Wood Veneer can be used for; Furniture Joinery Horizontal and Vertical surfaces Kitchen and Bathroom cabinetry Wall panelling
Finished product made in NZ Future proof building accredited Exclusive range Efficiency of raw resource - little waste Bestwood Avantedge solid edging solution available Modern & consistent range of species in both colour & design
Bestwood Reconstituted Veneer is manufactured from natural logs, which are pulped & pressed into sheets, dyed through the entire veneer thickness, re-laminated together and then re-sliced to produce consistent grain patterns and colours. Each dye-lot will have no variation in colour but as with all dyed products some variations may occur in different batch lots. Bestwood Reconstituted Veneer is supplied hand trimmed and sanded. It may be left unsanded or skim-sanded if requested.
Bestwood Reconstituted Veneer can be supplied in low formaldehyde emitting MDF substrates. Other types of substrates are available upon request thought they may not meet the requirements for Green Star NZ. These are available in a selection of gauges and sizes ensuring the correct option for almost every specification. For a list of available sizes please visit www.bestwood.co.nz. As a reconstituted panel product made from wood, resin and wax there is a very low level of formaldehyde emitted. The formaldehyde glue emissions pertaining to Bestwood Reconstituted Veneer low formaldehyde comply with the E1 European standard.
To ensure your Bestwood Reconstituted Veneer maintains is colour and quality cleaning is recommended. For dusting use a soft dry cloth or feather duster and for polishing use a high quality furniture polish (non-silicone based). For any spillages, these should be cleaned with a damp cloth as soon as possible; moisture may cause damage to the coating. If you get any persistent marks, these may be removed by mild non-abrasive cleaner appropriate for the surface finish. Do not use “spray & wipe” solutions or excessive force when removing marks. Direct sunlight should be avoided on all internal veneered surfaces as fading, bleaching or colour changes of the surface coating may occur 
|
| ||||||||||||||||||||||||||||||||||||||||||||||||
