|
 |
 | |
|
|
|
| |
|
|
| |
| ||
|
|
| |
|
|
| |
|
|
Home > Structure > Concrete > In Situ Concrete > Surface finishes to set in situ concrete Dricon OxiTone® Firth has currently engaged in an environmental assessment of its products with Greenbuild. Work is in progress and results will be published shortly.Dricon OxiTone® colourants are specially designed iron oxide colours for colouring concrete, mortar and plaster.
View Product Certifications
Dricon OxiTone® is designed for adding colour to concrete, mortar and plaster for jobs such as plastering, footpaths, driveways, mowing strips, kerbing, garden ornaments, jointing for paving slabs and footings for letterboxes and clotheslines.
Dricon® OxiTone® products are a simple way to add colour to cement based products. They are weather resistant and colour stable and will not contribute to efflorescence.
Dricon OxiTone® colourants contain synthetic iron oxide and are manufactured to exacting standards. Colour range: Black, Burnt Umber, Chrome Green, Dark Brown, Dark Red, Light Brown, Marigold, White and Yellow.
Colours in the Dricon OxiTone® range are obtained at 4% pigment to cement weight. Dricon OxiTone® meets or exceeds standards for the use of colour in cement and building applications.
Dricon OxiTone® is available in 1 kg jars or 20 kg bags. Actual weights may vary by colour. Dricon OxiTone® colourants can be used with any concrete products but for best results Dricon MortarPlaster®, the Dricon Trade Mortar® range or Dricon® HandiCrete® are recommended. Mix Dricon OxiTone® thoroughly with dry ingredients. Add water. Mix until workable consistency is achieved. The water to cement ratio strongly influences colour. Water usage must be consistent from batch to batch to avoid colour variation. Natural cement colour also affects the final concrete colour; white cement will produce a brighter result than grey Portland cement.
|
You are viewing product 1 of 0 Next >
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
