|
 |
 | |
|
|
|
| |
|
|
| |
| ||
|
|
| |
|
|
| |
|
|
Home > Finish > Painting and paperhanging > Exterior Painting > Exterior painting - timber cladding Resene Waterborne Woodsman (inc. Cool Colour) - Penetrating Oil Stain - Exterior - Waterborne Resene Waterborne Woodsman is a waterborne woodstain matching the needs of timber to the desire to achieve the most natural appearance possible. Resene Waterborne Woodsman is also available in a Resene Cool Colour variant. NB. Resene Cool Colours need to be clearly identified in both the product specification and colour schedule to ensure correct tinting is applied.Key Properties: VOC: c. 81 grams per litre Usual no. of coats: 2 (new work - see limitations); 1-2 (old work) Environmental Choice approved: Yes Made in New Zealand: Yes 100% NZ owned and operated
View Product Certifications View Potential Green Star credits
Typical uses: • Beams • Fences • Garden furniture • Plywood and profiled sheets • Timber - dressed and rough sawn • Weatherboards Application: Resene Waterborne Woodsman may be applied by brush, roller or spray. Saturate surface with Resene Waterborne Woodsman. During application stir the contents of the can frequently to ensure even distribution of colour. Aim to achieve the targeted coverage for the substrate. See Resene Data Sheet D57 and product label for full details. Limitations: 1. Will not kill existing mould. Use Resene Moss & Mould Killer (see Resene Data Sheet D80). 2. Will not prevent checking of plywood. 3. Will require maintenance after two summers. 4. New dressed or dense timber may need a third coat after three months.
• Provides a genuine rustic look. • Very easy application. • Requires minimum surface preparation. • Contains powerful fungicides for mould resistance. • An Environmental Choice approved product. Cool colours reflect more heat than standard colours, reducing stress on the paint, substrate and building, reducing heat transference inside and minimizing the need for air conditioning. Unwanted paint and paint containers can be returned to the Resene PaintWise paint and paint packaging recovery programme. Returns are donated to community groups, sent to solvent recovery, packaging is recycled and other paint goes into covering graffiti and research on alternative uses. See link to Resene PaintWise.
Physical properties: Vehicle type: Oil-based waterborne Pigmentation: Natural coloured oxides and limed colours Solvent: Water Finish: Fully penetrating over bare timber Colour: Standard colours from the Resene Woodsman colour chart. Dry time: 24 hours at 18°C Recoat: 24 hours at 18°C Primer required: No Theoretical coverage: dependant on surface Dry film thickness: 34 microns at 12 sq. metres per litre Usual no. of coats: 2 (new work - see limitations); 1-2 (old work) Thinning and clean up: Do not thin; clean up with water when wet; mineral turps when dry VOC: c. 81 grams per litre
Resene products are guaranteed to provide film integrity and adhesion for the expected life of the paint system. See link for a full copy of the Resene Promise of quality, which includes details of the expected paint system life. Maintenance: Avoid cleaning the paint finish until at least four weeks after application time to ensure it has had sufficient time to fully develop its properties. Keep any cleaning to a minimum to avoid damaging the paint film. Follow the care and cleaning instructions in the Resene Caring for your paint finish brochure.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
