|
 |
 | |
|
|
|
| |
|
|
| |
| ||
|
|
| |
|
|
| |
|
|
Home > Finish > Painting and paperhanging > Exterior Painting > Exterior painting - cementitious Resene Sonyx 101 (inc. Cool Colour) – Semi-gloss Paint – Exterior / Interior - Waterborne Resene Sonyx 101 is a waterborne, semi gloss, interior and exterior decorative topcoat. Resene Sonyx 101 is a member of a new generation family of waterborne coatings optimised for superior toughness, durability and adhesion, combined with superb flowing good looks.Resene Sonyx 101 is also available in a Resene Cool Colour variant. NB. Resene Cool Colours need to be clearly identified in both the product specification and colour schedule to ensure correct tinting is applied. Key Properties: VOC: c. 59 grams per litre Usual no. of coats: 2 Environmental Choice approved: Yes Made in New Zealand: Yes 100% NZ Owned and Operated
View Product Certifications View Potential Green Star credits
Typical uses: • Block and brickwork • Concrete • Fibre cement • G.R.C. panels • Primed galvanised steel • Primed timber • Solid plaster • Wallboards Application: Resene Sonyx 101 may be applied by brush, synthetic fibre roller, speed brush or spray. See Resene Data Sheet D30 and product label for full details. Limitations: 1. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period. 2. Not designed for direct to metal applications. 3. Will not penetrate chalky and powdery surfaces. 4. Not normally used on opening sashes and doors use Resene Lustacryl (see Resene Data Sheet D310).
• Available in a wide range of colours or can be colour matched to your requirements • Ideal coating for exterior Cementitious substrates. • Excellent intercoat adhesion. • Excellent adhesion to Resene primers • Excellent durability in high U.V. environments. • An Environmental Choice approved product. Cool colours reflect more heat than standard colours, reducing stress on the paint, substrate and building, reducing heat transference inside and minimizing the need for air conditioning. Unwanted paint and paint containers can be returned to the Resene PaintWise paint and paint packaging recovery programme. Returns are donated to community groups, sent to solvent recovery, packaging is recycled and other paint goes into covering graffiti and research on alternative uses. See link to Resene PaintWise.
Physical properties: Vehicle type: (Aliphatic acrylates) 100% acrylic Pigmentation: Titanium dioxide/extenders Solvent: Water Finish: Semi-gloss Colour: Selected colours from the Resene Total Colour System Dry time: 45 minutes at 18°C Recoat time (minimum): 2 hours Primer required: Yes, dependent on surface Theoretical coverage: 12 sq. metres per litre Dry film thickness: 38 microns at 12 sq. metres per litre Usual no. of coats: 2 - some colours may require an additional coat Abrasion resistance: Very good Chemical resistance: Good Heat resistance: Thermoplastic Solvent resistance: Fair Durability: Excellent Thinning and clean up: Water VOC: c. 59 grams per litre Fire indices relating to Resene Sonyx 101 and the associated test report references are available from the included link.
Resene products are guaranteed to provide film integrity and adhesion for the expected life of the paint system. See the link for a full copy of the Resene Promise of quality, which includes details of the expected paint system life. Maintenance: Avoid cleaning the paint finish until at least four weeks after application time to ensure it has had sufficient time to fully develop its properties. Keep any cleaning to a minimum to avoid damaging the paint film. Follow the care and cleaning instructions in the Resene Caring for your paint finish brochure.
|
You are viewing product 1 of 0 Next >
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
