|
 |
 | |
|
|
|
| |
|
|
| |
| ||
|
|
| |
|
|
| |
|
|
Home > Finish > Painting and paperhanging > Painting - General > Paint - primers Resene Quick Dry – Primer Undercoat – Exterior / Interior - Waterborne Resene Quick Dry Acrylic Primer Undercoat provides long-term flexibility over unstable substrates coupled with exceptional durability even when left uncoated for prolonged periods. The latest formulation has enhanced flow and sanding characteristics for maximum benefit under waterborne enamels, such as Resene Enamacryl and Resene Lustacryl.Key Properties: VOC: c. 41 grams per litre Usual no. of coats: 1-2 Environmental Choice approved: Yes Made in New Zealand: Yes 100% NZ Owned and Operated
View Product Certifications View Potential Green Star credits
Typical uses: • Architraves • Bison board • Block and brickwork • Cement plaster • Cloth and woven wallcoverings • Customwood • Particle and chipboard • Repaint old work • Timber (including Matai, Merbeau, Spotted Gum, Totara) • Wallboards • Wallpaper Application: Resene Quick Dry may be applied by brush, speed brush, synthetic fibre roller or spray. Spray application is generally not preferred for the first coat. See Resene Data Sheet D45 and product label for full details. Limitations: 1. Do not apply at temperatures below 10°C, or when it is liable to drop below 10°C during the drying period. 2. Not designed as a first coat over metal surfaces or weak powdery surfaces.
• Excellent adhesion to substrates including old paint. • Outstanding durability maintaining flexibility for the life of the system. • Excellent flow and sanding properties. • Successful primer/undercoat for chip, bison and customwood boards. Resene Quick Dry seals the waxes used in the board and makes ready for any subsequent paint system. • Designed with a low sheen that allows exceptional enamel hold-out. • An ideal primer for Matai, Merbeau, Spotted Gum and Totara. • An Environmental Choice approved product. Unwanted paint and paint containers can be returned to the Resene PaintWise paint and paint packaging recovery programme. Returns are donated to community groups, sent to solvent recovery, packaging is recycled and other paint goes into covering graffiti and research on alternative uses. See link to Resene PaintWise.
Physical properties: Vehicle type: 100% acrylic Pigmentation: Titanium dioxide/fillers Solvent: Water Finish: Low sheen Colour: White Dry time: 20 minutes at 18°C Recoat time (minimum): 2 hours Primer required: see precautions on datasheet Theoretical coverage: 12.5 sq. metres per litre Dry film thickness: 35 microns at 12.5 sq. metres per litre Usual no. of coats: 1-2 Chemical resistance: Good Heat resistance: Thermoplastic Solvent resistance: Good Sanding Properties: Good Durability: Excellent Thinning and clean up: Water VOC: c. 41 grams per litre Fire indices relating to Resene Quick Dry and the associated test report references are available from the included link.
Resene products are guaranteed to provide film integrity and adhesion for the expected life of the paint system. See the link for a full copy of the Resene Promise of quality, which includes details of the expected paint system life. Maintenance: Avoid cleaning the paint finish until at least four weeks after application time to ensure it has had sufficient time to fully develop its properties. Keep any cleaning to a minimum to avoid damaging the paint film. Follow the care and cleaning instructions in the Resene Caring for your paint finish brochure.
|
You are viewing product 1 of 0 Next >
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
