|
 |
 | |
|
|
|
| |
|
|
| |
| ||
|
|
| |
|
|
| |
|
|
Home > Finish > Painting and paperhanging > Interior Painting > Interior concrete floor paints Resene Non-Skid Deck & Path - Exterior / Interior - Waterborne Resene Non-Skid Deck & Path is a 100% acrylic coating filled with graded silicas tinted to a range of standard colours. Designed for use on both concrete and bitumen to give a durable, tough, non-skid finish on all areas where foot traffic is likely.Key Properties: VOC: c. 13 grams per litre Usual no. of coats: 2 Environmental Choice approved: Yes Made in New Zealand: Yes 100% NZ owned and operated
View Product Certifications View Potential Green Star credits
Typical uses: • Bitumen • Concrete Application: A hi-solids roller is generally the preferred application method. May also be applied by brush, synthetic fibre roller, spray or squeegee. See Resene Data Sheet D313 and product label for full details Limitations: 1. Do not apply at temperatures below 10°C, or when it is liable to drop below 10°C during the drying period. Thicker application such as can occur in depressions will take longer to dry and will remain consequently more liable to damage by early rain. 2. Requires conscientious surface preparation. 3. Repaints require the existing coating to have good integrity and adhesion. Resene Non-Skid Deck & Path should only be applied over old Resene Non-Skid Deck & Path or similar products in sound condition, otherwise existing coatings should be stripped back to bare substrate.
• Easy to apply. • High film build. • Excellent durability. • Excellent traction properties. • An Environmental Choice approved product. Unwanted paint and paint containers can be returned to the Resene PaintWise paint and paint packaging recovery programme. Returns are donated to community groups, sent to solvent recovery, packaging is recycled and other paint goes into covering graffiti and research on alternative uses. See link to Resene PaintWise.
Physical properties: Vehicle type: 100% acrylic Pigmentation: Inorganic pigments and gap graded silicas Solvent: Water Finish: Rough texture Colour Standard range of Resene Non-Skid Deck & Path colours; may be tinted to other colours on request Dry time: hour at 17°C (75% RH) Allow at least 24 hours before using coated area Recoat time (minimum): 3 hours Theoretical coverage: First coat – 2-6 sq. metres per litre, Second coat – 4-6 sq. metres per litre Dry film thickness: 165 microns at 3 sq. metres per litre Usual no. of coats: 2 Abrasion resistance: Excellent Durability: Excellent Thinning and clean up: Water VOC: c. 13 grams per litre
Resene products are guaranteed to provide film integrity and adhesion for the expected life of the paint system. See the link for a full copy of the Resene Promise of quality, which includes details of the expected paint system life. Maintenance: Avoid cleaning the paint finish until at least four weeks after application time to ensure it has had sufficient time to fully develop its properties. Keep any cleaning to a minimum to avoid damaging the paint film. Follow the care and cleaning instructions in the Resene Caring for your paint finish brochure.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
