|
 |
 | |
|
|
|
| |
|
|
| |
| ||
|
|
| |
|
|
| |
|
|
Home > Finish > Painting and paperhanging > Specialist Coatings > Specialist decorative coatings Resene X-200 (inc. Cool Colour) - Waterproofing Membrane - Exterior / Interior - Waterborne Resene X-200 is an acrylic waterproofing membrane incorporating the most recent advances in polymer and paint technology. Shows significant advances in the areas of film build, adhesion, penetration, application and durability.Resene X-200 is also available in a Resene Cool Colour variant. NB. Resene Cool Colours need to be clearly identified in both the product specification and colour schedule to ensure correct tinting is applied. Key Properties: VOC: 62 grams per litre Usual no. of coats: 2; blockwork – 3 Environmental Choice approved: Yes Made in New Zealand: Yes 100% NZ owned and operated
View Product Certifications View Potential Green Star credits
Typical uses: • Concrete blocks • Concrete surfaces • Fibre reinforced cement. Application: Resene X-200 may be applied by brush, roller or airless spray. See Resene Data Sheet D62 and product label for full details. Limitations: 1. Old, weathered concrete requires surface conditioning with Resene Sureseal (see Resene Data Sheet D42). 2. Do not apply at temperatures below 10°C, or when it is liable to drop below 10°C during the drying period. 3. Not designed to be used under ponded water.
• Remarkable ease of application. • Superior void and crack filling properties. • Excellent durability. Requires no further ’weathering’ coats. • An Environmental Choice approved product. Cool colours reflect more heat than standard colours, reducing stress on the paint, substrate and building, reducing heat transference inside and minimizing the need for air conditioning. Unwanted paint and paint containers can be returned to the Resene PaintWise paint and paint packaging recovery programme. Returns are donated to community groups, sent to solvent recovery, packaging is recycled and other paint goes into covering graffiti and research on alternative uses. See link to Resene PaintWise.
Physical properties: Vehicle type: Pure acrylic Pigmentation: Titanium dioxide/mineral and fibre reinforcement Solvent: Water Finish: Eggshell, very fine texture Colour: Selected Total Colour System, including BS5252, Multi-Finish, Whites & Neutrals and The Range. Dry time: 1 hour at 18°C Recoat time (minimum): 3 hours Primer required: Yes, dependent on surface Theoretical coverage: First coat: 5 sq. metres per litre, Second coat: 7.5 sq. metres per litre Dry film thickness: 2 coats 180 microns Usual no. of coats: 2; blockwork – 3 Abrasion resistance: Very Good Chemical resistance: Very Good Heat resistance: Thermoplastic Solvent resistance: Good Durability: Excellent Thinning and clean up: Do not thin, clean up with water VOC: c. 62 grams per litre Fire indices relating to Resene X-200 and the associated test report references are available from the included link.
Resene products are guaranteed to provide film integrity and adhesion for the expected life of the paint system. See the link for a full copy of the Resene Promise of quality, which includes details of the expected paint system life. Maintenance: Avoid cleaning the paint finish until at least four weeks after application time to ensure it has had sufficient time to fully develop its properties. Keep any cleaning to a minimum to avoid damaging the paint film. Follow the care and cleaning instructions in the Resene Caring for your paint finish brochure.
|
You are viewing product 1 of 0 Next >
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
