|
 |
 | |
|
|
|
| |
|
|
| |
| ||
|
|
| |
|
|
| |
|
|
Home > Finish > Painting and paperhanging > Interior Painting > Interior painting - timber Resene Aquaclear - Urethane Waterborne Varnish – Interior - Waterborne Resene Aquaclear has been developed as a waterborne alternative to turps thinned oil modified urethanes. Where maximum abrasion resistance is required, such as high traffic floors, a moisture-cured urethane, such as Resene Polythane (see Resene Data Sheet D53), is recommended.Key Properties: VOC: c. 95 grams per litre Usual no. of coats: 4 Environmental Choice approved: Yes Made in New Zealand: Yes 100% NZ owned and operated
View Product Certifications View Potential Green Star credits
Typical uses: • Cork • Desks • Doors • Fibre and particleboard • Furniture • Panelling • Parquet • Skirtings • Solid timber • Veneers Application: Application by speed brush is recommended. May also be applied by bristle brush and spray. Roller application is not recommended because of the likelihood of excessive foam formation. Apply Resene Aquaclear evenly, avoiding working back over areas that have begun to set as this will lead to a patchy finish. See Resene Data Sheet D59 and product label for full details. Limitations: 1. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period. 2. Dries very quickly at high temperatures and low humidity. Maintain a wet edge. 3. Not recommended for high abrasion areas. 4. Allow 72 hours for coating to reach full cure.
• Low odour application and drying. • Water wash up. • Easy recoating. • An Environmental Choice approved product. Unwanted paint and paint containers can be returned to the Resene PaintWise paint and paint packaging recovery programme. Returns are donated to community groups, sent to solvent recovery, packaging is recycled and other paint goes into covering graffiti and research on alternative uses. See link to Resene PaintWise.
Physical properties: Vehicle type: Urethane/acrylic Pigmentation: Flatting agents Solvent: Water Finish: Satin, semi-gloss, gloss Colour: Turbid - dries clear Dry time: 30 minutes at 18°C Recoat time (minimum): 2 hours; full cure: 72 hours Theoretical coverage: About 12 sq. metres per litre Dry film thickness: 23 microns at 12 sq. metres per litre Usual no. of coats: 4 Abrasion resistance: Fair Heat resistance: Thermoplastic Solvent resistance: Good Durability: Good Thinning and clean up: Water VOC: c. 95 grams per litre mixed
Resene products are guaranteed to provide film integrity and adhesion for the expected life of the paint system. See the link for a full copy of the Resene Promise of quality, which includes details of the expected paint system life. Maintenance: Avoid cleaning the paint finish until at least four weeks after application time to ensure it has had sufficient time to fully develop its properties. Keep any cleaning to a minimum to avoid damaging the paint film. Follow the care and cleaning instructions in the Resene Caring for your paint finish brochure.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
